Stone guide · MB-L05
Taza Beige Zébré: technical guide and uses in Marrakech
Taza Beige Zébré is a predominantly beige natural stone, recognisable by natural layers and pores. This guide helps determine whether it suits a kitchen, bathroom, floor, staircase or outdoor project in Marrakech.
Request my quote →- Reference
- MB-L05
- Family
- Natural stone
- Origin
- Morocco · Taza
- Suggested finish
- aged or honed
Origin
Origin, composition and appearance
Taza Beige Zébré is a trade name generally associated with quarries in Morocco, around Taza. Country, quarry and grade are still checked against the lot available in Morocco before ordering.
Its beige background shows natural layers and pores. As with every natural stone, pattern density and shade vary from slab to slab.
Natural stone
From quarry block to installed piece
This natural stone is not manufactured like a composite surface. It is quarried and then processed for the project.
- 1
Block extraction
Blocks are quarried and sorted for structure, colour and consistency.
- 2
Slab sawing
Blocks are sawn into slabs. Depending on the stone, drying, filling or resin reinforcement may be applied.
- 3
Surface finish
The surface is calibrated and receives a aged or honed finish for the required appearance and slip resistance.
- 4
Cutting and installation
The approved slab is cut to size, edge-finished, transported and installed with joints and treatments suited to the Marrakech project.
Strengths
- Natural mineral appearance that suits local architecture.
- Accepts several finishes, including honed, aged and textured.
- A sound choice for floors, walls and outdoors when correctly specified.
Points to consider
- Porosity can vary greatly with quarry and finish.
- Calcareous stones remain sensitive to acids and oily stains.
- Very smooth finishes are unsuitable for wet walking areas.
Taza Beige Zébré
Recommended applications
Our advice before ordering
Always approve the actual slab. Two lots sold under the same name may differ in shade, veining, microfissures and porosity. We also confirm thickness, finish, treatment and intended use before quoting.
FAQ
Frequently asked questions
Is Taza Beige Zébré suitable for a kitchen?
This is not our first choice for a heavily used worktop. We prefer it for the applications listed on this page.
Is Taza Beige Zébré suitable outdoors?
Yes, with a slip-resistant finish and prior validation of porosity, treatment and exposure.
How should Taza Beige Zébré be maintained?
Clean with a neutral product and limit water or oil penetration with a treatment matched to the porosity of the selected lot.
The stated properties are selection guidance. The lot data sheet and inspection of the actual slab take precedence.
Request a quote for Taza Beige Zébré
Send dimensions, intended use and a few photos. We will check slab availability and advise the correct finish.
Request my quote →